Interfaces

GraphQL interfaces map well to interfaces known from common object-oriented languages such as Java or C#, but Rust, unfortunately, has no concept that maps perfectly to them. The nearest analogue of GraphQL interfaces are Rust traits, and the main difference is that in GraphQL an interface type serves both as an abstraction and a boxed value (downcastable to concrete implementers), while in Rust, a trait is an abstraction only and to represent such a boxed value a separate type is required, like enum or trait object, because Rust trait doesn’t represent a type itself, and so can have no values. This difference imposes some unintuitive and non-obvious corner cases when we try to express GraphQL interfaces in Rust, but on the other hand gives you full control over which type is backing your interface, and how it’s resolved.

For implementing GraphQL interfaces Juniper provides the #[graphql_interface] macro.

Traits

Defining a trait is mandatory for defining a GraphQL interface, because this is the obvious way we describe an abstraction in Rust. All interface fields are defined as computed ones via trait methods.

extern crate juniper;
use juniper::graphql_interface;

#[graphql_interface]
trait Character {
    fn id(&self) -> &str;
}

fn main() {}

However, to return values of such interface, we should provide its implementers and the Rust type representing a boxed value of this trait. The last one can be represented in two flavors: enum and trait object.

Enum values (default)

By default, Juniper generates an enum representing the values of the defined GraphQL interface, and names it straightforwardly, {Interface}Value.

extern crate juniper;
use juniper::{graphql_interface, GraphQLObject};

#[graphql_interface(for = [Human, Droid])] // enumerating all implementers is mandatory 
trait Character {
    fn id(&self) -> &str;
}

#[derive(GraphQLObject)]
#[graphql(impl = CharacterValue)] // notice enum name, NOT trait name
struct Human {
    id: String,
}

#[derive(GraphQLObject)]
#[graphql(impl = CharacterValue)]
struct Droid {
    id: String,
}

fn main() {}

Also, enum name can be specified explicitly, if desired.

extern crate juniper;
use juniper::{graphql_interface, GraphQLObject};

#[graphql_interface(enum = CharaterInterface, for = Human)] 
trait Character {
    fn id(&self) -> &str;
}

#[derive(GraphQLObject)]
#[graphql(impl = CharaterInterface)]
struct Human {
    id: String,
    home_planet: String,
}

fn main() {}

Interfaces implementing other interfaces

GraphQL allows implementing interfaces on other interfaces in addition to objects.

extern crate juniper;
use juniper::{graphql_interface, graphql_object, ID};

#[graphql_interface(for = [HumanValue, Luke])]
struct Node {
    id: ID,
}

#[graphql_interface(impl = NodeValue, for = Luke)]
struct Human {
    id: ID,
    home_planet: String,
}

struct Luke {
    id: ID,
}

#[graphql_object(impl = [HumanValue, NodeValue])]
impl Luke {
    fn id(&self) -> &ID {
        &self.id
    }

    // As `String` and `&str` aren't distinguished by 
    // GraphQL spec, you can use them interchangeably.
    // Same is applied for `Cow<'a, str>`.
    //                  ⌄⌄⌄⌄⌄⌄⌄⌄⌄⌄⌄⌄
    fn home_planet() -> &'static str {
        "Tatooine"
    }
}

fn main() {}

NOTE: Every interface has to specify all other interfaces/objects it implements or implemented for. Missing one of for = or impl = attributes is a compile-time error.

# extern crate juniper;
use juniper::{graphql_interface, GraphQLObject};

#[derive(GraphQLObject)]
pub struct ObjA {
  id: String,
}

#[graphql_interface(for = ObjA)]
// ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 
// 'Failed to implement interface `Character` on `ObjA`: missing interface reference in implementer's `impl` attribute.'
struct Character {
  id: String,
}

fn main() {}

GraphQL subtyping and additional nullable fields

GraphQL allows implementers (both objects and other interfaces) to return “subtypes” instead of an original value. Basically, this allows you to impose additional bounds on the implementation.

Valid “subtypes” are:

  • interface implementer instead of an interface itself:
    • I implements T in place of a T;
    • Vec<I implements T> in place of a Vec<T>.
  • non-null value in place of a nullable:
    • T in place of a Option<T>;
    • Vec<T> in place of a Vec<Option<T>>.

These rules are recursively applied, so Vec<Vec<I implements T>> is a valid “subtype” of a Option<Vec<Option<Vec<Option<T>>>>>.

Also, GraphQL allows implementers to add nullable fields, which aren’t present on an original interface.

extern crate juniper;
use juniper::{graphql_interface, graphql_object, ID};

#[graphql_interface(for = [HumanValue, Luke])]
struct Node {
    id: ID,
}

#[graphql_interface(for = HumanConnectionValue)]
struct Connection {
    nodes: Vec<NodeValue>,
}

#[graphql_interface(impl = NodeValue, for = Luke)]
struct Human {
    id: ID,
    home_planet: String,
}

#[graphql_interface(impl = ConnectionValue)]
struct HumanConnection {
    nodes: Vec<HumanValue>,
    //         ^^^^^^^^^^ notice not `NodeValue`
    // This can happen, because every `Human` is a `Node` too, so we are just
    // imposing additional bounds, which still can be resolved with
    // `... on Connection { nodes }`.
}

struct Luke {
    id: ID,
}

#[graphql_object(impl = [HumanValue, NodeValue])]
impl Luke {
    fn id(&self) -> &ID {
        &self.id
    }
    
    fn home_planet(language: Option<String>) -> &'static str {
        //                   ^^^^^^^^^^^^^^
        // Notice additional `null`able field, which is missing on `Human`.
        // Resolving `...on Human { homePlanet }` will provide `None` for this
        // argument.
        match language.as_deref() {
            None | Some("en") => "Tatooine",
            Some("ko") => "타투인",
            _ => todo!(),
        }
    }
}

fn main() {}

Violating GraphQL “subtyping” or additional nullable field rules is a compile-time error.

# extern crate juniper;
use juniper::{graphql_interface, graphql_object};

pub struct ObjA {
    id: String,
}

#[graphql_object(impl = CharacterValue)]
impl ObjA {
    fn id(&self, is_present: bool) -> &str {
//     ^^ the evaluated program panicked at 
//        'Failed to implement interface `Character` on `ObjA`: Field `id`: Argument `isPresent` of type `Boolean!` 
//         isn't present on the interface and so has to be nullable.'        
        is_present.then_some(&self.id).unwrap_or("missing")
    }
}

#[graphql_interface(for = ObjA)]
struct Character {
    id: String,
}
#
# fn main() {}
# extern crate juniper;
use juniper::{graphql_interface, GraphQLObject};

#[derive(GraphQLObject)]
#[graphql(impl = CharacterValue)]
pub struct ObjA {
    id: Vec<String>,
//  ^^ the evaluated program panicked at 
//     'Failed to implement interface `Character` on `ObjA`: Field `id`: implementor is expected to return a subtype of 
//      interface's return object: `[String!]!` is not a subtype of `String!`.'    
}

#[graphql_interface(for = ObjA)]
struct Character {
    id: String,
}
#
# fn main() {}

Ignoring trait methods

We may want to omit some trait methods to be assumed as GraphQL interface fields and ignore them.

extern crate juniper;
use juniper::{graphql_interface, GraphQLObject};

#[graphql_interface(for = Human)]  
trait Character {
    fn id(&self) -> &str;

    #[graphql(ignore)] // or `#[graphql(skip)]`, your choice
    fn ignored(&self) -> u32 { 0 }
}

#[derive(GraphQLObject)]
#[graphql(impl = CharacterValue)]
struct Human {
    id: String,
}

fn main() {}

Fields, arguments and interface customization

Similarly to GraphQL objects Juniper allows to fully customize interface fields and their arguments.

#![allow(deprecated)]
extern crate juniper;
use juniper::graphql_interface;

// Renames the interface in GraphQL schema.
#[graphql_interface(name = "MyCharacter")] 
// Describes the interface in GraphQL schema.
#[graphql_interface(description = "My own character.")]
// Usual Rust docs are supported too as GraphQL interface description, 
// but `description` attribute argument takes precedence over them, if specified.
/// This doc is absent in GraphQL schema.  
trait Character {
    // Renames the field in GraphQL schema.
    #[graphql(name = "myId")]
    // Deprecates the field in GraphQL schema.
    // Usual Rust `#[deprecated]` attribute is supported too as field deprecation,
    // but `deprecated` attribute argument takes precedence over it, if specified.
    #[graphql(deprecated = "Do not use it.")]
    // Describes the field in GraphQL schema.
    #[graphql(description = "ID of my own character.")]
    // Usual Rust docs are supported too as field description, 
    // but `description` attribute argument takes precedence over them, if specified.
    /// This description is absent in GraphQL schema.  
    fn id(
        &self,
        // Renames the argument in GraphQL schema.
        #[graphql(name = "myNum")]
        // Describes the argument in GraphQL schema.
        #[graphql(description = "ID number of my own character.")]
        // Specifies the default value for the argument.
        // The concrete value may be omitted, and the `Default::default` one 
        // will be used in such case.
        #[graphql(default = 5)]
        num: i32,
    ) -> &str;
}

fn main() {}

Renaming policies for all GraphQL interface fields and arguments are supported as well:

#![allow(deprecated)]
extern crate juniper;
use juniper::graphql_interface;

#[graphql_interface(rename_all = "none")] // disables any renaming
trait Character {
    // Now exposed as `my_id` and `my_num` in the schema
    fn my_id(&self, my_num: i32) -> &str;
}

fn main() {}

Custom context

If a Context is required in a trait method to resolve a GraphQL interface field, specify it as an argument.

extern crate juniper;
use std::collections::HashMap;
use juniper::{graphql_interface, GraphQLObject};

struct Database {
    humans: HashMap<String, Human>,
}
impl juniper::Context for Database {}

#[graphql_interface(for = Human)] // look, ma, context type is inferred! \(^o^)/
trait Character {                 // while still can be specified via `Context = ...` attribute argument
    // If a field argument is named `context` or `ctx`, it's automatically assumed
    // as a context argument.
    fn id(&self, context: &Database) -> Option<&str>;

    // Otherwise, you may mark it explicitly as a context argument.
    fn name(&self, #[graphql(context)] db: &Database) -> Option<&str>;
}

#[derive(GraphQLObject)]
#[graphql(impl = CharacterValue, Context = Database)]
struct Human {
    id: String,
    name: String,
}

fn main() {}

Using executor and explicit generic scalar

If an Executor is required in a trait method to resolve a GraphQL interface field, specify it as an argument.

This requires to explicitly parametrize over ScalarValue, as Executor does so.

extern crate juniper;
use juniper::{graphql_interface, graphql_object, Executor, LookAheadMethods as _, ScalarValue};

#[graphql_interface(for = Human, Scalar = S)] // notice specifying `ScalarValue` as existing type parameter
trait Character<S: ScalarValue> {             
    // If a field argument is named `executor`, it's automatically assumed
    // as an executor argument.
    fn id<'a>(&self, executor: &'a Executor<'_, '_, (), S>) -> &'a str;

    // Otherwise, you may mark it explicitly as an executor argument.
    fn name<'b>(
        &'b self,
        #[graphql(executor)] another: &Executor<'_, '_, (), S>,
    ) -> &'b str;
    
    fn home_planet(&self) -> &str;
}

struct Human {
    id: String,
    name: String,
    home_planet: String,
}
#[graphql_object(scalar = S: ScalarValue, impl = CharacterValue<S>)]
impl Human {
    async fn id<'a, S>(&self, executor: &'a Executor<'_, '_, (), S>) -> &'a str 
    where
        S: ScalarValue,
    {
        executor.look_ahead().field_name()
    }

    async fn name<'b, S>(&'b self, #[graphql(executor)] _: &Executor<'_, '_, (), S>) -> &'b str {
        &self.name
    }
    
    fn home_planet<'c, S>(&'c self, #[graphql(executor)] _: &Executor<'_, '_, (), S>) -> &'c str {
        // Executor may not be present on the trait method  ^^^^^^^^^^^^^^^^^^^^^^^^
        &self.home_planet
    }
}

fn main() {}

ScalarValue considerations

By default, #[graphql_interface] macro generates code, which is generic over a ScalarValue type. This may introduce a problem when at least one of GraphQL interface implementers is restricted to a concrete ScalarValue type in its implementation. To resolve such problem, a concrete ScalarValue type should be specified.

extern crate juniper;
use juniper::{graphql_interface, DefaultScalarValue, GraphQLObject};

#[graphql_interface(for = [Human, Droid])]
#[graphql_interface(scalar = DefaultScalarValue)] // removing this line will fail compilation
trait Character {
    fn id(&self) -> &str;
}

#[derive(GraphQLObject)]
#[graphql(impl = CharacterValue, Scalar = DefaultScalarValue)]
struct Human {
    id: String,
    home_planet: String,
}

#[derive(GraphQLObject)]
#[graphql(impl = CharacterValue, Scalar = DefaultScalarValue)]
struct Droid {
    id: String,
    primary_function: String,
}

fn main() {}